Layering Stencil Bluebell Card

A project from our live show HOBBYMAKER TV - Join us for the latest show - Broadcast 5 p.m. (UK) 15th August 2026 · 15/08/2026 · watch it from 40:00

▶ 🔊 TAP FOR SOUND

Recorded videoOffers on screen may no longer be valid - find out more at Hobbymaker.com

Create a beautiful floral card featuring vibrant pink poppies with lush green foliage on a soft yellow background. Using a five-layer stencil system, you'll build up colour and dimension gradually to achieve a professional, multi-toned effect. This layering technique brings depth and realism to your floral design, perfect for special occasion cards.

DOWNLOAD THIS GUIDE (PDF)

Step by step

1. 

   Prepare a white or cream card blank as your base. Use an ink pad to apply light pink ink over the card surface, creating a soft background for your layered stencil design.

   ▶ watch this step (40:15)
2. 

   Select stencil number one from the layering stencil set. Position it on your card base, aligning it with the edge and ensuring the number marking is visible on the correct side.

   ▶ watch this step (40:30)
3. 

   Using a purple dye-based ink and a blending tool or sponge, lightly tap the ink through the stencil onto the card. Press gently from the very first application to build up the colour gradually.

   ▶ watch this step (40:45)
4. 

   Position stencil number two over the same area and apply more purple ink using the blending tool. Press slightly harder to build up depth and intensity of colour over the first layer.

   ▶ watch this step (41:00)
5. 

   Continue building up the bluebell design using stencils three, four and five. Gradually increase the pressure and colour intensity with each layer to create depth and dimension in the flowers.

   ▶ watch this step (41:30)
6. 

   For the final layer, press the blending tool firmly onto the card to create the darkest, most defined areas of the purple bluebells. Apply strong pressure to build up the deepest tones and add dimension to the flowers.

   ▶ watch this step (42:00)
7. 

   Using lime green ink and a blending sponge, colour all the leaves and stems through the stencil. Apply the colour in the same dabbing motion as before, building up the intensity as desired.

   ▶ watch this step (42:30)
8. 

   Allow the card to dry completely before removing the stencils. The purple bluebell flowers will appear soft and layered once dry.

   ▶ watch this step (43:00)
9. 

   Lightly spray the finished floral design with water using a spray bottle. This creates a soft, blended, ethereal effect on the stencilled flowers and leaves.

   ▶ watch this step (43:30)

Tips from the show

• Start with light pressure and build up gradually—you can always add more colour, but you cannot remove it.
• Keep the stencil aligned with the edge of your card for consistent placement of all layers.
• If you make a mistake or the layers don't line up perfectly, spray with water to blend and soften the effect into an artistic finish.

More from this show

• Lamination Stamp Card with Watercolour Effect
• Layering Stencil Classic Rose Card

Written up from the show itself. See every guide from our shows · free how-to guides · watch live on My Telly