LIENS RAPIDES

info@howtocraftnetwork.com
Encore plus malin : achetez et regardez avec l'application SBMTÉLÉCHARGEZ L'APPLIRegardez-nous en direct sur votre smart TVVOIR COMMENTDécouvrez notre chaîne IPTV dédiée : rendez-vous sur my-telly.comREGARDERCumulez des points de fidélité à chaque commandeEN SAVOIR PLUS
Bienvenue sur How to Craft Network
 
SBM SHOP
SUIVEZ-NOUS
OFFREZ 10 £ DE RÉDUCTION À VOS AMIS PARRAINEZ UN AMI › DÉCOUVRIR MY-TELLY.COM › ENCORE PLUS MALIN TÉLÉCHARGEZ L'APPLI › CHAÎNE PRIMÉE SUR VOTRE TV › REJOIGNEZ LE CLUB POUR ÉCONOMISER ›
 
Hello Friend
Tutoriel · 10 étapes

Hello Friend

12 octobre 2021Découpe
10étapes
Étape 1 sur 10

Tout ce qu’il vous faut

0 sur 16 prêts· 3 à acheter
Acheter la liste
Dans votre stock créatif
Cochez ce que vous avez - cet appareil s’en souvient.

Étape par étape

touchez une image pour l’agrandir · touchez TERMINÉ au fur et à mesure - cet appareil s’en souvient
Étape 1 sur 10

Cut off one full drop from the Summer Breeze Washi Tape (place both dies on the tape to work out where this will be). 

Peel off one corner of the backing, then carefully unroll, and smooth out the washi, from the centre outwards, as you adhere to the A4 white cardstock. 

Place one of the coordinating dies in place, on the washi, and run through your die cutting machine. Remove all die cuts and pop to one side. 

Place the second die in place, on the washi, and run through the die cutting machine. Remove all the die cuts and add to the others, ready for use. 

Étape 2 sur 10

Adhere the large washi die cut, as shown in this image, on to the bottom left corner of the DL card blank. À NOTER :Only apply glue to the far left hand side, far right side and bottom of this washi die cut, as the top MUST be left open, to create a "pocket" (I have popped a piece of green card, 2 1/2" wide, in to the "pocket", on this photo, as a visual guide only). 

Set card blank to one side. 

Étape 3 sur 10

Use the Tag Punch to make a tag from the 6 x 2 1/2 " white cardstock. 

Étape 4 sur 10

Spray the Izink Vert D'Eau Shiny on to a craft or glass mat, and mop up the ink on to the tag. 

Allow to dry, or use a heat gun, if your're impatient like me!

Étape 5 sur 10

Cut up the washi die cut ive shown you, on the right of this photo, and adhere to your tag with wet glue. 

Étape 6 sur 10

Adhere the washi bird and dragonflies, in place using wet glue, as your tag will need to be able to slide in to the "pocket". You can keep the wings of the Dragonflies loose, so the recipient can "lift" them. 

Set tag to one side. 

Étape 7 sur 10

Add some pearl drops around the "pocket" on the card blank, as desired, but keeping the pocket opening clear. 

Étape 8 sur 10

Add some of the other washi die cuts to the top of your card blank, and add liquid pearl drops around these, as desired.

Add the pearl drops to your tag as desired.

Set your card blank and tag to one side, to allow all the drops to dry. 

Étape 9 sur 10

Once all the drops are dry, or being very careful, you can adhere your pre cut Sepia Washi Tabs in place, on the card blank and tag, using foam pads. 

Étape 10 sur 10

Your pocket tag card is now complete and the tag can be kept as a gift, bookmark etc. 

Optional: You can stamp a sentiment on the reverse of the tag, if desired, or inside the card. 

Bravo, c’est fait !

Partagez votre création avec la communauté Stamps By Me - et gardez ce tutoriel pour la prochaine fois.

⇩ TÉLÉCHARGER LE PDF

Plus de tutoriels : die cutting

tous les tutoriels ›

Vous préférez l’ancienne présentation ? Ouvrir l’ancienne page.