Scrap Card Mosaic Panel with Gold Embossed Grout

Een project uit onze live-uitzending TERUGKIJKEN: Monday Madness met Simon in de How To Craft Network-studio 20 sep 21 · 20/09/2021 · bekijk het vanaf 25:30

A striking background panel made from colourful card scraps arranged in a brick or random pattern with gaps between each piece, then enhanced with gold embossing powder in the gaps to create a tiled, grout-like effect. Perfect for using up leftover card and creating a masculine, feminine or children's card depending on colour choice.

DIT STAPPENPLAN DOWNLOADEN (PDF)

Stap voor stap

1. Cut card scraps into 1-inch strips, each 3 inches long, using a paper trimmer for consistency. ▶ watch 26:45
2. Prepare a double-sided adhesive sheet pre-stuck to a piece of card, then peel away the backing to reveal the sticky surface. ▶ watch 27:45
3. Arrange the first card strip onto the sticky surface, leaving a deliberate gap between it and the edge. ▶ watch 28:15
4. Continue adding strips in varying colours and tones, rotating the direction and leaving consistent gaps between each piece to create a brick or random pattern. ▶ watch 28:45
5. Fill any remaining gaps with smaller leftover scraps, adjusting the pattern as you go. ▶ watch 29:45
6. Trim all the protruding edges level with the card base using the back of the card as a guide. ▶ watch 30:30
7. Sprinkle gold embossing powder generously over the entire panel, making sure it fills all the gaps between the strips. ▶ watch 31:30
8. Tap off the excess powder and heat emboss, keeping the heat gun slightly higher than normal to avoid the tape wrinkling. ▶ watch 31:45
9. Stamp a sentiment onto vellum using black ink and emboss with black embossing powder. ▶ watch 34:45
10. Tear the vellum into a band shape with an uneven edge, tearing downwards slowly for control. ▶ watch 38:45
11. Secure the vellum band across the panel using double-sided tape, positioning the sentiment in the centre. ▶ watch 39:15
12. Layer the embossed panel onto a gold glitter card border, then mount onto a black card base. ▶ watch 40:30
13. Add small black gems around the card as a finishing embellishment. ▶ watch 42:15

Tips uit de show

• Leave gaps between each strip—this gap is essential to achieve the tiled effect.
• Keep the heat gun higher than normal when embossing tape to prevent it wrinkling.
• Double-sided adhesive sheets can be prepared in advance and stored until you're ready to use them.

Meer uit deze show

• Floral Decoupage Card with Dinosaur Accent

Uitgeschreven op basis van de show zelf. Bekijk alle stappenplannen uit onze uitzendingen · gratis stappenplannen · kijk live op My Telly